DL35

Designed to be the most advanced, reliable, quietest, and user-friendly dehumidifiers available on the market today. Ultra-quiet, low maintenance dehumidifier, that provides the end user a host of information previously not seen on small/medium industrial desiccant dehumidifiers.

Rated airflow – 3500 m³/h
Dehumidification – 21,9 kg/h
Power supply – 27,2 kW (3×400 v, 50 Hz)
Dimensions – 1355x1200x1680

MDC5000

Desiccant Technologies Group industrial desiccant dehumidifier MDC5000 designed for general purposes – room air dehumidification and process drying. The compact construction allows extended periods of operation with a minimum of maintenance. Especially suitable for low temperature and low humidity operation. Unit includes desiccant rotor, EC-fans, reactivation heater, bag filters and controls. Panels insulated with 20mm rock wool insulation.

Rated airflow – 5000 m³/h
Dehumidification – 30 kg/h (20ºC/60% RH)
Power supply – 42,5 kW (3×400 V, 50 Hz)
Dimensions – 1960x1280x1605mm

Lithium battery dry room dual rotor dehumidifiers LDP-2DW

Lithium battery dry room dual rotor dehumidifiers LDP-2DW. Ultra-low dewpoint industrial desiccant dehumidification systems

Overview

• Unit airflow range available from 2,000 to 50,000 m3h
• Available Supply Dew point down to minus 80°C
• Ultra low leakage and compact design
• Optimized for low energy usage with up to 50% energy reduction available over single rotor systems.

MDC3000R

The MDC3000R is a robust, high-capacity desiccant dehumidifier designed for general air dehumidification and process drying. Engineered for dependable performance in a range of industrial and commercial settings, it is especially effective in low temperature and low humidity environments. Its compact and durable construction allows for continuous operation with minimal maintenance, making it well suited to both permanent installations and short-term hire for project-based needs. The unit incorporates a desiccant rotor, EC-fans, a reactivation heater, filters, and integrated controls to ensure efficient, reliable moisture management.

Rated airflow – 3000 m³/h
Dehumidification – 21.9 kg/h
Power supply – 25.52 kW (3ph+N 400V, 50 Hz)
Dimensions – 1235x3396x1660

Air Handling Units with in-built desiccant dehumidifier

We are able to provide tailor made units from 1600 … 50000m3/h of nominal flow rate. The installation options: indoor or outdoor. The units are able to maintain necessary temperature, humidity and indoor air quality in the industrial, commercial or residential buildings.

The unit can be provided with following functional sections:

• Heating (water, steam, electrical, gas fired)
• Cooling (chilled water or DX)
• Heat recovery (plate, rotor or 2 coils with intermediate fluid)
• Fine filtration, HEPA filtration, mixing, sound attenuation